Amazon SCS-C03 Exam Dumps

AWS Certified Security – Specialty

Amazon SCS-C03 Sample Questions

Question # 1

A company uses several AWS CloudFormation stacks to handle the deployment of a suiteof applications. The leader of the company's application development team notices that thestack deployments fail with permission errors when some team members try to deploy thestacks. However, other team members can deploy the stacks successfully.The team members access the account by assuming a role that has a specific set ofpermissions. All team members have permissions to perform operations on the stacks.Which combination of steps will ensure consistent deployment of the stacksMOSTsecurely? (Select THREE.)

A. Create a service role that has a composite principal that contains each service that needs the necessary permissions. 
B. Create a service role that has cloudformation.amazonaws.com as the service principal.
C. Add policies that reference each CloudFormation stack ARN.
D. Add policies that reference the ARNs of each AWS service that requires permissions.
E. Update each stack to use the service role.
F. Add a policy to each member role to allow the iam:PassRole action for the service role.

Show Answer

Question # 2

 security engineer is troubleshooting an AWS Lambda function that isnamedMyLambdaFunction. The function is encountering an error when the functionattempts to read the objects in an Amazon S3 bucket that is namedDOC-EXAMPLEBUCKET. The S3 bucket has the following bucket policy:{"Effect": "Allow","Principal": { "Service": "lambda.amazonaws.com" },"Action": "s3:GetObject","Resource": "arn:aws:s3:::DOC-EXAMPLE-BUCKET","Condition": {"ArnLike": {"aws:SourceArn": "arn:aws:lambda:::function:MyLambdaFunction"}}}Which change should the security engineer make to the policy to ensure that the Lambdafunction can read the bucket objects?

A. Remove the Condition element. Change the Principal element to the following:{ "AWS":"arn:aws:lambda:::function:MyLambdaFunction" }
B. Change the Action element to the following:["s3:GetObject*", "s3:GetBucket*"]
C. Change the Resource element to"arn:aws:s3:::DOC-EXAMPLE-BUCKET/*".
D. Change the Resource element to "arn:aws:lambda:::function:MyLambdaFunction".Change the Principal element to the following:{ "Service": "s3.amazonaws.com" }

Show Answer

Question # 3

A company is operating an open-source software platform that is internet facing. Thelegacy software platform no longer receives security updates. The software platformoperates using Amazon Route 53 weighted load balancing to send traffic to two AmazonEC2 instances that connect to an Amazon RDS cluster. A recent report suggests thissoftware platform is vulnerable to SQL injection attacks, with samples of attacks provided.The company’s security engineer must secure this system against SQL injection attackswithin 24 hours. The security engineer’s solution must involve the least amount of effortand maintain normal operations during implementation.What should the security engineer do to meet these requirements?

A. Create an Application Load Balancer with the existing EC2 instances as a target group.Create an AWS WAF web ACL containing rules that protect the application from this attack,then apply it to the ALB. Test to ensure the vulnerability has been mitigated, then redirectthe Route 53 records to point to the ALB. Update security groups on the EC2 instances toprevent direct access from the internet.
B. Create an Amazon CloudFront distribution specifying one EC2 instance as an origin.Create an AWS WAF web ACL containing rules that protect the application from this attack,then apply it to the distribution. Test to ensure the vulnerability has been mitigated, thenredirect the Route 53 records to point to CloudFront.
C. Obtain the latest source code for the platform and make the necessary updates. Testthe updated code to ensure that the vulnerability has been mitigated, then deploy thepatched version of the platform to the EC2 instances.
D. Update the security group that is attached to the EC2 instances, removing access fromthe internet to the TCP port used by the SQL database. Create an AWS WAF web ACLcontaining rules that protect the application from this attack, then apply it to the EC2instances. Test to ensure the vulnerability has been mitigated, then restore the securitygroup to the original setting.

Show Answer

Question # 4

A company has enabled AWS Config for its organization in AWS Organizations. Thecompany has deployed hundreds of Amazon S3 buckets across the organization. Asecurity engineer needs to identify any S3 buckets that are not encrypted with AWS KeyManagement Service (AWS KMS). The security engineer also must prevent objects thatare not encrypted with AWS KMS from being uploaded to the S3 buckets.Which solution will meet these requirements?

A. Use thes3-default-encryption-kmsAWS Config managed rule to identify unencrypted S3buckets. Create an SCP to allow thes3:PutObjectaction only when the object is encryptedwith AWS KMS.
B. Use thes3-default-encryption-kmsAWS Config managed rule to identify unencrypted S3buckets. Create bucket policies for each S3 bucket to deny thes3:PutObjectaction onlywhen the object has server-side encryption with S3 managed keys (SSE-S3).
C. Use thes3-bucket-ssl-requests-onlyAWS Config managed rule to identify unencryptedS3 buckets. Create an SCP to allow thes3:PutObjectaction only when the object isencrypted with AWS KMS
D. Use thes3-bucket-ssl-requests-onlyAWS Config managed rule to identify unencryptedS3 buckets. Create bucket policies for each S3 bucket to allow thes3:PutObjectaction onlywhen the object is encrypted with AWS KMS

Show Answer

Question # 5

A company needs to scan all AWS Lambda functions for code vulnerabilities.

A. Use Amazon Macie.
B. Enable Amazon Inspector Lambda scanning.
C. Use GuardDuty and Security Hub.
D. Use GuardDuty Lambda Protection.

Show Answer

Question # 6

A company runs a global ecommerce website that is hosted on AWS. The company usesAmazon CloudFront to serve content to its user base. The company wants to block inboundtraffic from a specific set of countries to comply with recent data regulation policies.Which solution will meet these requirements MOST cost-effectively?

A. Create an AWS WAF web ACL with an IP match condition to deny the countries' IPranges. Associate the web ACL with the CloudFront distribution.
B. Create an AWS WAF web ACL with a geo match condition to deny the specificcountries. Associate the web ACL with the CloudFront distribution.
C. Use the geo restriction feature in CloudFront to deny the specific countries.
D. Use geolocation headers in CloudFront to deny the specific countries.

Show Answer

Question # 7

A company’s security team needs to receive a notification whenever an AWS access keyhas not been rotated in 90 or more days. A security engineer must develop a solution thatprovides these notifications automatically.Which solution will meet these requirements with the LEAST amount of effort?

A. Deploy an AWS Config managed rule to run on a periodic basis of 24 hours. Select theaccess-keys-rotated managed rule, and set the maxAccessKeyAge parameter to 90 days.Create an Amazon EventBridge rule with an event pattern that matches the compliancetype of NON_COMPLIANT from AWS Config for the managed rule. Configure EventBridgeto send an Amazon SNS notification to the security team.
B. Create a script to export a .csv file from the AWS Trusted Advisor check for IAM accesskey rotation. Load the script into an AWS Lambda function that will upload the .csv file toan Amazon S3 bucket. Create an Amazon Athena table query that runs when the .csv fileis uploaded to the S3 bucket. Publish the results for any keys older than 90 days by usingan invocation of an Amazon SNS notification to the security team.
C. Create a script to download the IAM credentials report on a periodic basis. Load thescript into an AWS Lambda function that will run on a schedule through AmazonEventBridge. Configure the Lambda script to load the report into memory and to filter thereport for records in which the key was last rotated at least 90 days ago. If any records aredetected, send an Amazon SNS notification to the security team
D. Create an AWS Lambda function that queries the IAM API to list all the users. Iteratethrough the users by using the ListAccessKeys operation. Verify that the value in theCreateDate field is not at least 90 days old. Send an SNS notification to the security team ifthe value is at least 90 days old. Create an EventBridge rule to schedule the Lambdafunction to run each day.

Show Answer

Question # 8

Service (Amazon EKS) clusters. The solution must require no additional configuration ofthe existing EKS deployment.Which solution will meet these requirements with the LEAST operational effort?

A. Install a third-party security add-on.
B. Enable AWS Security Hub and monitor Kubernetes findings.
C. Monitor CloudWatch Container Insights metrics for EKS.
D. Enable Amazon GuardDuty and use EKS Audit Log Monitoring.

Show Answer

Question # 9

A company needs to detect unauthenticated access to its Amazon Elastic KubernetesService (Amazon EKS) clusters. The solution must require no additional configuration ofthe existing EKS deployment.Which solution will meet these requirements with the LEAST operational effort?

A. Install a third-party security add-on.
B. Enable AWS Security Hub and monitor Kubernetes findings.
C. Monitor CloudWatch Container Insights metrics for EKS.
D. Enable Amazon GuardDuty and use EKS Audit Log Monitoring.

Show Answer

Question # 10

A company hosts a web application on an Apache web server. The application runs onAmazon EC2 instances that are in an Auto Scaling group. The company configured theEC2 instances to send the Apache web server logs to an Amazon CloudWatch Logs groupthat the company has configured to expire after 1 year.Recently, the company discovered in the Apache web server logs that a specific IP addressis sending suspicious requests to the web application. A security engineer wants to analyzethe past week of Apache web server logs to determine how many requests that the IPaddress sent and the corresponding URLs that the IP address requested.What should the security engineer do to meet these requirements with the LEAST effort?

A. Export the CloudWatch Logs group data to Amazon S3. Use Amazon Macie to query thelogs for the specific IP address and the requested URLs.
B. Configure a CloudWatch Logs subscription to stream the log group to an AmazonOpenSearch Service cluster. Use OpenSearch Service to analyze the logs for the specificIP address and the requested URLs
C. Use CloudWatch Logs Insights and a custom query syntax to analyze the CloudWatchlogs for the specific IP address and the requested URLs.
D. Export the CloudWatch Logs group data to Amazon S3. Use AWS Glue to crawl the S3bucket for only the log entries that contain the specific IP address. Use AWS Glue to viewthe results.

Show Answer

Question # 11

A company needs to build a code-signing solution using an AWS KMS asymmetric key andmust store immutable evidence of key creation and usage for compliance and auditpurposes.Which solution meets these requirements?

A. Create an Amazon S3 bucket with S3 Object Lock enabled. Create an AWS CloudTrailtrail with log file validation enabled for KMS events. Store logs in the bucket and grantauditors access.
B. Log application events to Amazon CloudWatch Logs and export them.
C. Capture KMS API calls using EventBridge and store them in DynamoDB.
D. Track KMS usage with CloudWatch metrics and dashboards.

Show Answer

Question # 12

A consultant agency needs to perform a security audit for a company's production AWSaccount. Several consultants need access to the account. The consultant agency alreadyhas its own AWS account. The company requires multi-factor authentication (MFA) for allaccess to its production account. The company also forbids the use of long-termcredentials.Which solution will provide the consultant agency with access that meets theserequirements?

A. Create an IAM group. Create an IAM user for each consultant. Add each user to thegroup. Turn on MFA for each consultant.
B. Configure Amazon Cognito on the company’s production account to authenticateagainst the consultant agency's identity provider (IdP). Add MFA to a Cognito user pool
C. Create an IAM role in the consultant agency's AWS account. Define a trust policy thatrequires MFA. In the trust policy, specify the company's production account as theprincipal. Attach the trust policy to the role
D. Create an IAM role in the company’s production account. Define a trust policy thatrequires MFA. In the trust policy, specify the consultant agency's AWS account as theprincipal. Attach the trust policy to the role.

Show Answer

Question # 13

A company uses an organization in AWS Organizations to manage multiple AWS accounts.The company uses AWS IAM Identity Center to manage access to the accounts. Thecompany uses AWS Directory Service as an identity source. Employees access the AWSconsole and specific AWS accounts and permissions through the AWS access portal.A security engineer creates a new permissions set in IAM Identity Center and assigns thepermissions set to one of the member accounts in the organization. The security engineerassigns the permissions set to a user group for developers namedDevOpsin the memberaccount. The security engineer expects all the developers to see the new permissions setlisted for the member account in the AWS access portal. All the developers except for onecan see the permissions set. The security engineer must ensure that the remainingdeveloper can see the permissions set in the AWS access portal.Which solution will meet this requirement?

A. Add the remaining developer to the DevOps group in Directory Service.
B. Remove and then re-add the permissions set in the member account.
C. Add the service-linked role for organization to the member account.
D. Update the permissions set to allow console access for the remaining developer.

Show Answer

Question # 14

A company has an AWS Lambda function that requires access to an Amazon S3 bucket.The company’s security policy requires that connections to Amazon S3 are over a privatenetwork and are secure.The company has configured a gateway VPC endpoint in the VPC to allow access toAmazon S3. The company has configured the Lambda function to run inside the VPC.Additionally, the company has configured the Lambda function to use a private subnet thathas a route to the internet through a NAT gateway. Other resources in the VPC use thisprivate subnet to access the internet successfully. When the Lambda function runs, it usesthe NAT gateway instead of the gateway VPC endpoint to access Amazon S3.What can a security engineer do to ensure that the Lambda function uses the gatewayVPC endpoint for Amazon S3?

A. Remove the route to the NAT gateway within the route table of the private subnet thatthe Lambda function uses.
B. Associate the gateway VPC endpoint with the route table of the private subnet that theLambda function uses.
C. Adjust the gateway VPC endpoint policy to allow access from the Lambda function’snetwork interface address.
D. Configure the Lambda function’s security group to allow connections to the S3 networkaddress space.

Show Answer

Question # 15

A security engineer received an Amazon GuardDuty alert indicating a finding involving theAmazon EC2 instance that hosts the company's primary website. The GuardDuty findingreceived read:UnauthorizedAccess:IAMUser/InstanceCredentialExfiltration. The securityengineer confirmed that a malicious actor used API access keys intended for the EC2instance from a country where the company does not operate. The security engineer needsto deny access to the malicious actor.What is the first step the security engineer should take?

A. Open the EC2 console and remove any security groups that allow inbound traffic from0.0.0.0/0.
B. Install the AWS Systems Manager Agent on the EC2 instance and run an inventoryreport.
C. Install the Amazon Inspector agent on the host and run an assessment with the CVErules package
D. Open the IAM console and revoke all IAM sessions that are associated with the instanceprofile.

Show Answer

Question # 16

Notify when IAM roles are modified.

A. Use Amazon Detective.
B. Use EventBridge with CloudTrail events.
C. Use CloudWatch metric filters.
D. Use CloudWatch subscription filters.

Show Answer